Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Myers Park Homeowners
A fireplace that won’t light, smokes into the room, or smells of soot whenever the weather turns is telling you something needs attention before the next burn. Fireplace repair in Myers Park is the work of getting the firebox, damper, flue, and gas components back to safe working order. It’s not cosmetic. A clean, sealed flue is the difference between a working fireplace and a fire or carbon monoxide risk. Our technicians have up to 15 years of experience with wood-burning and gas systems, and we handle every stage from the firebox to the cap. When you call (833) 902-6314, we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Same-day repair is often possible in Myers Park, and estimates are free.
We’re a chimney-only specialist, not a handyman who sweeps on the side.
Key Takeaways
- Fireplace repair in Myers Park covers the firebox, damper, flue, gas burner, and insert, not just the visible opening.
- Every job starts with an inspection. Nothing is recommended without camera evidence you can see for yourself.
- We work with trade-grade materials including Gelco, Olympia Chimney, Famco, and Copperfield components.
- Estimates are free, and the written estimate sets the final price.
- Call (833) 902-6314. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
What Our Fireplace Repair Service Includes
We handle the whole fireplace system, not just the part that’s visibly broken. Here’s what each repair covers and when you’d need it.
Gas Fireplace Repair
Gas fireplaces fail in a few predictable ways: weak or uneven flame, a burner that won’t stay lit, soot on the logs, or a smell of gas near the valve. These symptoms usually point to a blocked burner port, a failing thermocouple, or a venting problem that isn’t letting exhaust escape properly. We check the gas connections, burner assembly, and venting as a single system, because a gas fireplace that burns poorly is often an airflow problem rather than a gas problem. Any work on the gas line itself is left to a licensed gas professional, and we’ll say clearly when that’s needed.

Wood Burning Fireplace Repair
Wood-burning fireplaces take more wear than most homeowners realize. The firebox brick, mortar joints, damper, and smoke shelf all degrade over years of heat cycling, and a cracked joint lets smoke and carbon monoxide slip past the flue. We look for spalled brick, crumbling mortar, a warped or stuck damper, and creosote buildup that restricts draft. Then we repair the masonry and components so the fireplace draws correctly again. Myers Park’s older homes often have fireplaces built decades ago, and the mortar in those fireboxes is frequently the first thing to fail.

Fireplace Insert Service
An insert is a stove unit fitted into an existing fireplace to improve heat output and efficiency. Inserts need their own service: the liner that carries exhaust up the flue, the blower if there is one, gaskets, and the connection between the insert and the chimney. When an insert runs poorly, the cause is usually a torn gasket, a blocked liner, or a blower that’s stopped moving air. We service inserts across the major makes, including Olympia Chimney components, and we inspect the liner as part of the job because a bad liner behind a good insert is still a hazard.

Damper Repair
The damper is the metal plate that opens and closes the flue, and when it stops working you either lose heat up the chimney or can’t get smoke to draw. A damper that’s stuck open wastes energy; one stuck closed sends smoke into the room; a warped one never seals properly. We repair or replace dampers and check that the smoke shelf and frame are sound, since a new damper won’t seat correctly on a damaged frame. It’s a small part that controls the whole fireplace, which is why we treat it as a priority repair rather than an afterthought.
Firebox Repair
The firebox is the chamber where the fire actually burns, and it takes the most direct heat of any part of the system. Cracked bricks, crumbling mortar, and gaps at the seams allow heat and gases to reach framing behind the fireplace. We rebuild firebox masonry with heat-rated materials and reface where needed. This is one of the repairs homeowners most often put off, and it’s also one of the ones that matters most, because a compromised firebox is a structural and fire-safety concern, not a cosmetic one.
Pilot Light Repair
A gas fireplace pilot that won’t stay lit, or lights and then goes out, is a common call. The cause is usually a dirty pilot orifice, a thermocouple or thermopile that’s worn out, or a draft that’s blowing the flame out. We diagnose which of those it is and repair the assembly so the pilot holds reliably. If the problem traces back to the gas valve or supply, we’ll tell you and point you to the right licensed trade rather than guessing at it.
If you’re not sure which of these you need, that’s what the inspection is for. You can also read more about our full fireplace repair approach before you book.
Brands We Service for Fireplace Repair
We work with trade-recognized product lines, and that matters when a repair needs a part that fits properly. On the masonry and refractory side, we use Gelco materials for firebox and flue work because they’re built to take direct heat and hold up to repeated burn cycles. For dampers and fireplace components, Olympia Chimney parts give us a reliable fit on systems where generic hardware would rattle or fail to seal. Famco components come into play on caps and venting hardware, and Copperfield-sourced parts round out the chase covers and accessories that finish a repair properly.
Knowing where these materials wear out is half the job. Gelco refractory takes heat but fails at the seams first. Olympia dampers seize at the pivot before the plate warps. Famco and Copperfield hardware holds up well until a cap loosens and lets water in. We service fireplaces built around these brands and inspect the components around them, so a repair addresses the whole system rather than the one part that failed. Whether you have Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
Some symptoms are urgent. Others can wait for a scheduled visit. Here’s how to tell the difference without panicking.
- Smoke rolling into the room. Smoke that won’t go up the flue usually means a blocked chimney, a closed or broken damper, or negative pressure in the house. It’s a draft failure, and it also means exhaust isn’t leaving the way it should. This is worth a call before the next fire.
- A soot or creosote smell when the fireplace is cold. That smell often signals creosote buildup or a downdraft pulling air back down the flue. Creosote is what fuels chimney fires, so a persistent smell is a reason to get the flue looked at rather than ignored.
- Visible cracks or crumbling mortar in the firebox. Cracked bricks and loose joints let heat and gases reach the structure behind the fireplace. This one can safely wait a short while if the fireplace isn’t in use, but it should be repaired before you burn again.
- A gas fireplace that smells of gas or burns unevenly. Any gas smell is a stop-and-call situation: shut the valve and call us. An uneven or lazy flame without a gas smell is less urgent, but it points to a burner or venting issue that will only get worse.
- A damper that won’t open, close, or seal. A stuck damper either wastes heat up the chimney or traps smoke in the room. It’s rarely an emergency, but it’s an easy fix that protects the rest of the system, so it’s worth booking sooner rather than later.
Our Fireplace Repair Process – Step by Step
- 1
Inspection first. We start with a full inspection of the firebox, damper, flue, and any gas or insert components. We use a camera to look up the flue, because the damage that matters most is usually the damage you can’t see from the hearth. You get an honest assessment before any repair work begins.
- 2
Findings you can see. We show you the camera images and photos of what we found, point out what’s actually wrong, and tell you plainly which repairs are needed now and which can safely wait. Nothing gets recommended without evidence you can look at yourself.
- 3
Written estimate. You get a written estimate that breaks out the work and the materials before anything is booked. The estimate is free, and the written estimate sets the final price.
- 4
The repair. We carry out the work with trade-grade materials suited to the job: Gelco refractory for firebox masonry, Olympia Chimney components for dampers, and other recognized parts as needed. Because we cover inspection, cleaning, caps, and repair under one company, there’s no handoff to another contractor.
- 5
Final check and report. We test the fireplace after repair, confirm the damper and draft work, and leave you with a photo report of the finished work. If a follow-up sweep is what’s needed next, we tell you then.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Myers Park?
Fireplace repair in Myers Park typically runs from about $150 for a small component fix up to several thousand dollars for a firebox rebuild, and the range depends mostly on which part of the system has failed. These are typical estimates, not fixed prices.
- Pilot light or thermocouple repair: roughly $150 – $300, depending on the assembly.
- Damper repair or replacement: roughly $200 – $450, depending on the damper type and frame condition.
- Gas fireplace burner or component repair: roughly $250 – $600, depending on access and parts.
- Firebox masonry repair: roughly $500 – $1,500 for a partial repair, more for a full rebuild.
- Insert service or liner work: quoted per job once the liner is inspected.
A few things move the price. Access matters: a firebox tucked behind a tight surround takes longer than an open hearth. Materials matter, which is why we specify the grade we’re using. Hidden damage found once work starts can change the scope, and we’ll always come back to you before adding to it.
The best way to avoid overpaying is to get the inspection first and see the evidence. We don’t recommend liner or masonry work without camera images you can look at, and we’ll tell you when a repair can safely wait. Call (833) 902-6314 for an exact quote. Estimates are free, and the written estimate sets the final price.
Fireplace Repair Near Myers Park – Our Service Area
We serve homeowners across Myers Park and the surrounding neighborhoods, including Eastover, Elizabeth, Sedgefield, Dilworth, SouthPark, Cotswold, Plaza Midwood, and Quail Hollow. Drive times are short across this part of the city, so same-day repair is often possible when you call early. We also reach nearby communities like Mint Hill and Eastover without a long wait. If you’re in one of these neighborhoods, read about our fireplace repair service or the same work offered in fireplace repair for Eastover.
Serving Myers Park, NC – Our Local Coverage Area
We serve Myers Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Myers Park
Fireplace repair is the work of restoring the parts of a fireplace that have worn, cracked, or stopped functioning: the firebox, damper, flue, gas burner, pilot assembly, or insert. It’s different from a sweep, which removes creosote and soot. Repair addresses the component that’s broken or compromised, and it always starts with an inspection so we know what’s actually wrong. Call (833) 902-6314 to book an inspection.
Most component repairs, like a damper or pilot light, take a single visit of an hour or two. A firebox rebuild or insert service typically takes longer, sometimes across more than one visit once the extent of the damage is clear. We give you a time estimate with the written quote so you can plan around it. Call (833) 902-6314 for an exact timeline.
Typical fireplace repair in Myers Park ranges from about $150 for a small component fix to several thousand dollars for a full firebox rebuild. The price depends on the part involved, access, and materials. The written estimate sets the final price, and estimates are free. Call (833) 902-6314 for an exact quote.
Yes. We work with Gelco, Olympia Chimney, Famco, and Copperfield materials and components, and we service fireplaces built around those brands. We’re not a dealer, but we know where each of these materials tends to wear out, which helps us diagnose problems faster. Whether you have one of these brands or another make, call (833) 902-6314.
Same-day repair is often possible when you call early, depending on the part needed and the work involved. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 902-6314 to check availability.
Yes, our repair work is backed by a satisfaction guarantee, and we stand behind the work we do. The exact terms depend on the type of repair, and we walk you through them with the written estimate before anything is booked. Call (833) 902-6314 with questions about a specific job.
Clear the area in front of the fireplace so we have room to work, and don’t burn a fire in the 24 hours before the visit so the firebox is cool and safe to inspect. If it’s a gas fireplace, know where the shutoff valve is. Have any previous inspection reports handy if you have them. Call (833) 902-6314 to book, and we’ll confirm what to expect.
Schedule Your Fireplace Repair Service in Myers Park Today
If your fireplace won’t light, smokes, or has visible damage in the firebox, don’t put off the call. We inspect first, show you the evidence, and quote the work in writing before anything is booked. Estimates are free, and the written estimate sets the final price. Call (833) 902-6314. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One specialist, every stage of the job.
Written by the team at Chimney Sweep Myers Park.