Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hickory Grove
We handle chimney cap and crown work for homeowners across Hickory Grove, on Charlotte’s northeast side. This is where a lot of the housing went up between the 1980s and the early 2000s, and the tops of those chimneys are showing their age. Rusted caps, spalled crowns, water tracking down into prefab fireboxes: we see them on a regular basis here, and we can tell you what’s wrong before anyone recommends a repair. Call (833) 902-6314. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Hickory Grove Homeowners Call Chimney Sweep Myers Park for Chimney Cap & Crown
Hickory Grove sits inside the 28215 ZIP, and much of it is builder-grade subdivision housing from the 1980s through the 2000s. That matters here because the factory-built and clay-tile chimneys that went in with those homes were compliant when they were installed. Many have now gone 15 to 25 years without a sweep or a cap replacement. The routine job in Hickory Grove isn’t heavy soot removal – it’s a first-time inspection on a long-neglected flue, and what turns up more often than not is a cracked liner or a failing cap rather than a chimney that just needs brushing. We know that pattern well enough to look for it first instead of selling a cleaning and moving on.
We’re a chimney-only specialist. That means the same company that pulls the camera and reads the flue is the one that specifies the cap and rebuilds the crown, with no handoff. Our technicians have up to 15 years of experience, they work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield materials, and every recommendation we make comes with camera evidence you can look at yourself before you agree to anything.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Hickory Grove
These four services cover most of what we do on Hickory Grove chimneys. Each one starts with a look at what’s actually there, because a cap and a crown fail for different reasons and a fix that ignores the cause won’t last.
Cap Replacement
Most of the caps we replace in Hickory Grove are original galvanized units on prefab fireboxes, and they rust through at the screen seams after 10 to 15 humid summers. That’s shorter than you’d expect in a drier climate, but Piedmont humidity is hard on builder-grade steel. We pull the old cap, check the flue collar for damage underneath, and set a stainless or copper replacement sized to the flue.

Crown Repair
Original crowns on these homes were often pitched too flat, so rainwater pools at the flue collar, freezes, and spalls the mortar from the top down. A crown repair rebuilds the overhang and restores the drip edge so water sheds instead of soaking in. When the damage is limited to the surface, we can resurface rather than rebuild.

Crown Coating
A crown coating protects a sound crown before it starts to crack, and it’s also worth considering where the mortar has only lightly spalled. It’s not a fix for a crown that has lost its pitch or its overhang, and we’ll tell you when coating won’t do the job. Applied to the right crown, it holds up well against the humid-season cycling that chews through bare mortar here.

Cap Installation
A new cap on a chimney that never had one is the simplest weatherproofing on the list. It keeps rain out of the flue, stops birds and squirrels from getting down the stack, and spares the liner the direct wetting that accelerates spalling. We size it to the flue and anchor it against the wind gusts that come through the Piedmont.
Custom and multi-flue caps are part of the same work. Neo-traditional homes here often have a multi-flue chimney that takes a larger single cap, and odd flue arrangements sometimes call for a fabricated custom cap. If you have questions about any of it, our chimney cap & crown team can walk you through the options.
Trusted Brands We Service in Hickory Grove
We specify established names because caps and crown materials have to hold up for years, not seasons. DuraFlex is what we use for flexible stainless liner work where the flue is offset or older; HeatShield is the resurfacing system for damaged flue tiles, which saves a full demolition when the tile can be brought back. Gelco, Olympia Chimney, Famco and Copperfield supply components we rely on for caps and crowns. We don’t claim parts stock or a warehouse – the materials are ordered and the work is scheduled, and turnaround on a standard cap replacement is quick. The point is that what goes on your chimney is a product a chimney professional would recognize and specify, not an unbranded piece that fails in five years.
Common Chimney Cap & Crown Problems We See in Hickory Grove Homes
- Rusted-through galvanized caps. Original builder-grade caps rust at the screen seams after 10 to 15 humid Hickory Grove summers. Once the screen lets go, water runs straight into the flue.
- Cracked and spalled crowns. Where the mortar was pitched too flat, rainwater pools and freezes at the flue collar, and the crown cracks and flakes from the top down.
- Multi-flue caps packed with debris and nests. Neo-traditional homes here often have a single wide cap over several flues, and that footprint traps leaves and animal nests. Chimney swifts are federally protected, so nest removal has to wait until the birds fledge.
- Undersized or unsealed caps that pull loose. A cap that isn’t anchored and sized right can lift off in a Piedmont wind gust, leaving the liner open to direct rain.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Hickory Grove, NC
Here’s what the work typically runs in Hickory Grove. These are estimates, and the written estimate sets the final price.
| Service | Typical Hickory Grove Range |
|---|---|
| Standard stainless or copper cap installation | $195 – $425 |
| Cap replacement (removal and reset) | $225 – $475 |
| Custom cap or multi-flue cap | $550 – $1,200 |
| Crown repair (rebuild overhang and drip edge) | $375 – $850 |
| Crown coating | $250 – $475 |
What moves the price is the size and number of flues, whether the old cap comes off cleanly, and how much of the crown needs rebuild versus resurface. The estimate is free, and nothing on this list gets recommended without camera evidence you can see first.
We Also Serve Cities Near Hickory Grove
We work across the neighborhoods around Hickory Grove, and the same cap-and-crown work reaches our neighbors to the southwest in Plaza Midwood and NoDa, north toward Derita, and southeast to Mint Hill. The housing and the humidity are similar across all of them, and the inspection-first approach travels with us.
Serving Hickory Grove, NC – Our Local Coverage Area
We serve Hickory Grove and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Hickory Grove
Yes, in most cases. An original galvanized cap on a 1990s Hickory Grove home has been through 10 to 15 humid summers, which is right at the point where the screen seams rust through. We confirm it with camera stills before recommending anything. Call (833) 902-6314 for an exact quote – estimates are free.
A failing crown is cracked, flaking, or holding water at the flue collar; a dirty one is just stained. The difference shows up in the texture and in whether water pools after rain. We check the pitch and the drip edge as well as the surface, and we show you photos of what we find.
No. Chimney swifts are federally protected, so nest removal has to wait until the birds fledge and leave the flue. We’ll assess the chimney and schedule the work for after they’re gone. Call (833) 902-6314 and we’ll get you on the schedule.
A standard cap fits a single flue of common dimensions; a custom cap is fabricated for multi-flue chimneys or unusual flue arrangements. Some neo-traditional homes here need the larger footprint. The custom option runs higher at $550 – $1,200, but it seals a chimney a stock cap can’t cover.
It’s a real fix when the crown is still sound and only lightly spalled. It’s a patch if the crown has lost its pitch or overhang, and we won’t sell it as a rebuild in that case. Call (833) 902-6314 – the camera evidence tells us which one you need.
Book Chimney Cap & Crown Work in Hickory Grove
If your Hickory Grove chimney has a rusted cap, a cracked crown, or you’re not sure what’s up there, start with an inspection. Nothing gets recommended without camera evidence you can look at yourself. The estimate is free and set per job by the written estimate, and one specialist handles every stage from the cap down. Call (833) 902-6314. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Myers Park.