Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Myers Park Homeowners
Most Myers Park chimneys get looked at only when something already smells wrong or an insurance adjuster flags it. A proper chimney inspection finds the problem while it’s still small: a cracked flue tile, a failed crown joint, creosote packed into an offset. We work on nothing but chimneys and fireplaces, from the firebox to the cap, and our technicians have up to 15 years of experience reading what these systems actually need. An inspection here is a standalone service, so you get an honest assessment before any repair is discussed. Call (833) 902-6314. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
What Our Chimney Inspection Service Includes
An inspection is the starting point for everything else we do. Depending on what the visit calls for, it can range from a basic visual check to a camera run down the flue and a full structural review.
Level 1 Inspection
A Level 1 inspection is the standard annual check: we look at all readily accessible parts of the chimney and fireplace, from the firebox up to the cap, and confirm the system is sound. You need it once a year and after any change in how you burn, such as switching fuel type. In Myers Park we do this on the interior flue and firebox, then move to what’s visible from the roofline, and we note the condition of the joints and any creosote glaze in plain language.
Level 2 Inspection
A Level 2 inspection goes deeper, adding a camera run of the flue and closer inspection of areas that aren’t visible from the fireplace opening. It’s the one you need after a chimney fire, after an earthquake or major storm, when you’ve changed appliances, or when a property is being sold. We use a video camera to scan the full length of the flue and document what we see, so you can watch the same footage we do.
Level 3 Inspection
A Level 3 inspection is reserved for cases where a serious hazard is suspected in a concealed part of the chimney, and it may involve removing parts of the structure to get access. It’s needed when a Level 1 or Level 2 raises a real question about hidden damage. We only recommend it when the earlier findings justify it, and we explain exactly what will be opened up and why before any work begins.
Camera Inspection
A camera inspection sends a video camera down the flue so we can see the full internal surface, including offsets and the tops of flue tiles. It’s how you catch a cracked tile, a gap at a joint, or a liner that’s pulling apart, none of which show up from the fireplace. Myers Park’s older homes often have offset flues, and a camera run is the only reliable way to see around the bends.
Flue Inspection
A flue inspection focuses on the passage that carries smoke and gases out of the house, checking for blockages, creosote buildup, damaged tiles, and an unobstructed cap and damper. It’s what you want when smoke backs up, when the draft feels weak, or before the heating season starts. We check the full run of the flue and confirm the size matches the appliance, since an undersized flue in an older Myers Park house is a common reason for poor draft.
Real Estate Inspection
A real estate inspection is a full documented review done during a sale, so a buyer or seller knows the true condition of the chimney before closing. It typically combines a Level 2 scope with a written report you can hand to an agent or lender. We give you clear photos and findings, and when something can safely wait, we say so rather than turning a routine finding into a repair bill.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with trade-recognized materials and components, and we know how each one behaves over time. When we inspect a chimney fitted with an Olympia Chimney cap or a Gelco crown, we check the parts that fail first on those systems: the seal around the cap, the joints at the crown, and how the flashing sits against the roofline. If a HeatShield resurfacing was applied to a flue in the past, we inspect that surface specifically, since it changes what we look for in the tiles underneath.
On older Myers Park homes with clay flue tiles, we’re often evaluating whether a DuraFlex liner or a Famco component would make sense if the flue has deteriorated. That is a later conversation, not part of the inspection itself. We also look closely at Copperfield-sourced components where they’re present, since how they were installed tells us a lot about the rest of the system. Whether your chimney carries one of these names or another make entirely, we can help.
Signs You Need Chimney Inspection Right Now
- Smoke backing into the room. Smoke that won’t go up the flue usually means a blockage, a damaged flue tile, or a draft problem in the system. It’s a sign the chimney isn’t venting safely, and it’s worth a look before the next fire.
- A strong creosote smell, especially in warm weather. That smell is often glazed creosote sitting in the flue. Glazed creosote is the form most associated with chimney fires, so it’s a good reason to get the flue checked.
- Water stains or a damp firebox after rain. Water getting in around a failed cap or crown joint damages the masonry and the flue over time. Catching it early is usually a smaller fix than waiting.
- Cracked or loose flue tiles visible from the opening. Damaged tiles let heat and gases reach parts of the chimney that aren’t meant to take it. A camera inspection confirms how far the damage runs.
- A recent chimney fire or a chimney fire you suspect. Even a small fire can crack tiles and warp components without obvious signs. A Level 2 inspection after any suspected fire is the right move.
Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. Before anyone climbs anything, we ask how you use the fireplace, when it was last swept, and what you’ve noticed. That history tells us where to look hardest and shapes the level of inspection.
- 2
We inspect the interior. We check the firebox, damper, smoke chamber, and the accessible parts of the flue. We’re looking at joint condition, creosote, and anything that would let gases into the house.
- 3
We go to the roof and cap. From outside we check the cap, crown, flashing, and masonry for cracks and deterioration. This is where a lot of water damage starts, so it gets close attention.
- 4
We run a camera if the level calls for it. A video camera down the flue shows us the surfaces we can’t see from either end. We document what it finds so you’re looking at the same evidence we are.
- 5
We walk you through the findings. You get a clear report of what’s sound, what needs watching, and what genuinely needs repair. Nothing is recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Myers Park?
A typical Level 1 inspection in Myers Park runs $100 – $200, a Level 2 with a camera run typically runs $200 – $400, and a Level 3 or real estate inspection with a full written report usually falls in the $400 – $700 range. These are estimates for planning; the written estimate sets the final price for your job.
What moves the number is the level of inspection, whether a camera run is included, the condition and accessibility of the roof, and how much documentation a real estate sale needs. You avoid overpaying by getting the right level rather than the deepest one by default, and by asking for the written estimate before work starts. A free estimate here includes the walk-through, a clear explanation of findings, and a flat price agreed before anything is booked or billed. Nothing gets recommended without camera evidence you can view yourself.
Chimney Inspection Near Myers Park – Our Service Area
We inspect chimneys across Myers Park and the neighborhoods around it, including Eastover, Elizabeth, Sedgefield, Dilworth, and SouthPark, as well as further out in Mint Hill, Cotswold, Plaza Midwood, NoDa, Wesley Heights, and Quail Hollow. Scheduling is straightforward: call, and we’ll book an inspection for the earliest opening in your area. You can read more about how a chimney inspection works on our service page, and neighbors in Mint Hill and Eastover have their own local pages.
Serving Myers Park, NC – Our Local Coverage Area
We serve Myers Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Myers Park
A chimney inspection is a careful examination of your chimney and fireplace system to confirm it’s safe and sound. It looks at the firebox, flue, cap, crown, and masonry, and depending on the level, uses a camera to see inside the flue. For an annual check, a Level 1 inspection is usually enough; a sale, a chimney fire, or a suspected problem calls for a Level 2. Call (833) 902-6314 for an exact quote; estimates are free.
Most inspections take about 45 minutes to an hour and a half, depending on the level and how much camera work or reporting is involved. A Level 1 is on the shorter side; a Level 2 or real estate inspection with a full written report takes longer. We’ll tell you what to expect when we book it.
Expect roughly $100 – $200 for a Level 1, $200 – $400 for a Level 2 with a camera run, and $400 – $700 for a Level 3 or full real estate report. The level you need and the condition of the roof are the main factors. Call (833) 902-6314 for an exact quote; estimates are free.
Yes. We inspect chimneys with Famco and Olympia Chimney components, along with Gelco, Copperfield, DuraFlex, and HeatShield materials, and we know where each tends to wear. When a component is present, we check the parts that fail first on that system. Whether your chimney carries one of these names or another make, we can help.
Same-day inspections are often possible, depending on the schedule. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our work carries a satisfaction guarantee, so if the inspection report or a later repair doesn’t meet what we described, we’ll make it right. The written estimate spells out exactly what each line covers before you commit. Call (833) 902-6314 to talk through the details; estimates are free.
Clear the area around the fireplace and make sure we can reach the roof and the firebox without obstruction. Don’t light a fire in the hours before we arrive, and have any records from past sweeps or repairs on hand. That’s it; we handle the rest. A chimney inspection follows the same preparation, and you can read about the chimney inspection available to Eastover homeowners too.
Schedule Your Chimney Inspection Service in Myers Park Today
Know exactly what your chimney needs before any work begins. We inspect the whole system, document what we find with camera evidence you can see, and tell you plainly when a repair can safely wait. Nothing is recommended without proof in front of you. Call (833) 902-6314 for a no-obligation free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. For the full range of what we do, start with our Chimney Sweep Myers Park page.
Written by the team at Chimney Sweep Myers Park.