Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Dilworth
If your fireplace is smoking, your damper won’t close, or your gas logs are burning lazy and sooty, we handle fireplace repair in Dilworth and we start with evidence, not a sales pitch. Dilworth’s 1900s – 1930s brick chimneys were built for wood fires and now vent gas logs and inserts, which is why so many of the calls we take here come down to an original damper that rusted open or a clay-tile flue that was never sized for what’s hooked to it. We know this neighborhood’s housing stock, and we know what these old stacks do after a few damp Charlotte summers.
Call (833) 902-6314 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended until you’ve seen the camera footage yourself.
Why Dilworth Homeowners Call Chimney Sweep Myers Park for Fireplace Repair
We’re a chimney and fireplace specialist, not a generalist who sweeps on the side, and that matters most in a neighborhood like Dilworth where the chimneys are original. The work spans every stage from the firebox to the cap: inspection, sweeping, damper and firebox repair, fireplace repair, and structural chimney repair, so you’re not coordinating two or three trades on one old stack.
Our technicians have up to 15 years of experience with exactly this kind of masonry, and they use recognized trade materials – DuraFlex liners, HeatShield flue resurfacing, Gelco and Olympia Chimney components – rather than unbranded parts. Inspection is a standalone service here. You can have your chimney assessed and walk away with a written report and photos before committing to any repair at all. That’s the part Dilworth homeowners tell us they appreciate most, especially after an inspector or insurance adjuster has flagged something and they don’t know who to trust with the fix.
We work throughout Dilworth, from the blocks closest to East Boulevard to the streets near Latta Park, and the years of experience show up in the small things: knowing which damper styles show up in Four-Squares, which fireboxes have been parged over, and when a stack needs a crown rebuilt rather than a patch. Response is prompt and the estimate is free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Dilworth
Three services carry most of the work in this neighborhood: damper repair, firebox repair, and gas fireplace repair. Here’s what each involves and how it plays out on Dilworth’s older brick chimneys.
Damper Repair in Dilworth
Original dampers in Dilworth bungalows are frequently rusted open or seized shut after decades of humid Charlotte summers. A damper that won’t close loses you heat up the flue and lets damp air in; one that won’t open causes smoke roll-out into the room. We free, adjust, or replace seized dampers with trade-grade hardware, and we check the crown while we’re at it, because the two fail together on these old stacks.

Firebox Repair in Dilworth
Firebox mortar on 1900s – 1930s brick fireplaces often spalls and cracks, and the smoke chamber above it usually needs attention too. We rebuild firebox joints and repair the smoke chamber so the fire draws properly and the masonry holds together. If the damage reaches the flue tiles, we’ll show you the camera footage before recommending anything.

Gas Fireplace Repair in Dilworth
Many Dilworth fireplaces now run gas logs or inserts in flues that were never designed for them. We diagnose sooting flames, draft problems, and pilot light issues, and we check whether the flue is actually sized and lined for the appliance venting into it. Gas lines and pilot assemblies are not a do-it-yourself job – a trained professional should handle anything involving the gas supply or ignition.

Fireplace Insert Service in Dilworth
An insert dropped into an original masonry fireplace needs a properly sized liner and a sound firebox around it. We inspect the fit, check the liner connection, and address the gaps that let creosote and moisture reach framing. If an insert was installed years ago and never inspected since, that’s a good place to start.
Wood Burning Fireplace Repair in Dilworth
If you still burn wood, the repairs tend to center on draft and creosote in the clay-tile flue. We repair what’s cracked, resurface flue tiles where HeatShield is the right call, and clean out the creosote so the fireplace draws and burns safely.
Trusted Brands We Service in Dilworth
We work with established trade material lines: DuraFlex for flexible stainless liners that follow the offsets common in older flues, HeatShield for resurfacing damaged flue tiles without full demolition, and Gelco and Olympia Chimney for dampers, caps, and related components. These are names chimney professionals recognize and specify, and they last on a stack that’s been through a century of weather. We don’t claim to carry a stock of parts in a truck – the right components get sourced for your chimney and its measurements, without a long wait. Our technician experience with these materials is what keeps a repair from turning into a demolition.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Dilworth Homes
- Dampers seized or rusted open. Decades of humid Charlotte summers leave original dampers stuck, which costs you draft and lets smoke roll into the room. It’s one of the most common findings on a routine sweep in a Dilworth bungalow.
- Cracked or unlined clay-tile flues venting modern appliances. When gas logs or an insert was added to an original fireplace, the flue may never have been sized or lined for it, letting creosote and moisture reach the framing. A camera inspection is the only way to know what’s inside the stack.
- Spalling mortar and cracked crowns on early brick chimneys. Charlotte’s damp winters and freeze events work on old mortar, and once water gets in, the damage accelerates. Repointing and a crown rebuild are cheaper than the water damage they prevent.
- Heavy creosote from occasional wood burning. A fireplace used a few times a year builds creosote slowly, and it can glaze into harder deposits. A sweep with a camera check catches it before it becomes a fire risk.
Pricing for Fireplace Repair in Dilworth, NC
Fireplace repair in Dilworth is priced per job by a written estimate, and the estimate is free. A typical damper repair in Dilworth runs $150 – $380; firebox and smoke chamber repair runs $450 – $1,200; a HeatShield flue resurfacing runs $900 – $2,400; and a gas fireplace diagnostic and repair runs $120 – $400. Those ranges reflect what Dilworth’s older masonry actually needs, not a flat rate pulled from a chart. What moves the number: whether the flue is already lined, how much mortar has spalled, and whether the crown needs rebuilding. You see the camera footage and a written scope before you commit to anything, so you know what you’re paying for and why. If the work can safely wait until next season, we’ll tell you that too.
We Also Serve Cities Near Dilworth
Fireplace repair in the neighborhoods around Dilworth is part of the same work. We also serve Sedgefield, Elizabeth, Eastover, and Myers Park, where the housing stock and the older masonry chimneys bring the same kinds of repairs. If you’re just outside Dilworth, call and we’ll confirm your area. Our fireplace repair team handles the whole stack, from damper to crown.
Serving Dilworth, NC – Our Local Coverage Area
We serve Dilworth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Dilworth
Often yes, because original clay-tile flues were sized for wood fires, not the gas log set now venting into them. A Level 2 camera inspection shows whether the flue is lined, cracked, or undersized for the appliance, and we recommend a liner only when the footage supports it. Call (833) 902-6314 for a free estimate.
Smoke roll-out usually means the damper is stuck, the flue is blocked, or the smoke chamber and flue aren’t sized for the fireplace. In Dilworth’s older homes, a rusted-open damper or a cracked clay-tile flue is a common cause. A camera inspection pinpoints it before any repair is recommended. Call (833) 902-6314.
Look for cracked or crumbly mortar joints, a crown with visible fissures, or white staining on the brick. Charlotte’s damp winters and freeze events accelerate spalling, so those signs are worth checking before they spread. A chimney inspection confirms what’s actually happening. Call (833) 902-6314 for a free estimate.
It can be, because occasional burning still deposits creosote over time, and the humid climate helps it glaze into hard, shiny deposits. A sweep with a camera check catches it and confirms whether the flue needs resurfacing. Call (833) 902-6314.
DuraFlex for flexible stainless liners, HeatShield for flue resurfacing, and Gelco or Olympia Chimney for dampers and related components. These are established trade names, and we specify them for the specific chimney rather than a generic part. Call (833) 902-6314 for a free estimate.
If your fireplace is smoking, your damper is stuck, or your gas logs just aren’t drawing right, don’t guess at what’s behind the brick. Call Chimney Sweep Myers Park at (833) 902-6314 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll show you the camera footage, explain what actually needs fixing, and tell you plainly when work can safely wait.
Written by the team at Chimney Sweep Myers Park.